1 / 2
Doom Slayer Steam Machine Faceplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Requires four 8x2mm magnets. Mark of the Slayer stone memorial face plate for the Steam machine.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Doom Mark of the Slayer Steam Machine Faceplate
Modelled from Valve's official CAD release of the steam machine shell
Uses four 8x2mm magnets to hot-swap attach to the steam machine
Design based off the Doom
Print Setting Advice:
Print vertically standing for highest resolution,
Supports not needed, unless bridging is not tuned
Print with brim enabled for maximum bed adhesion during long print
Use super glue to attach the four 8x2mm magnets
Paint multicolor for ams or Paint IRL using primer spray paint + acrylic paint