1 / 2
Lian Li A3 mATX Front Panel with Removable Dust Cover — image 1
1 / 2

Lian Li A3 mATX Front Panel with Removable Dust Cover

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix that creates a tool less, removable dust cover panel for the Lian Li A3 mATX case

Rating
0 / 5
Likes
0
Downloads
9
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial

I loved the original design provided by Linus3D, but I was not a fan of all the openings and allowing potential dust flowing into the case. Using the baseline design, I reverse-engineered the geometry to develop a tool-less, removable dust cover that integrates within the front cover. The design consists of two components: a front cover that mounts to the case, and a dust cover retainer that secures the dust cover material and prevents it from being drawn into the case fans.

The dust cover material used is approximately 0.020" (~0.5 mm) in thickness. Once cut to size, place the material in the recess of the front panel, then gently bend the retainer to seat it into the grooves of the front panel.

For reference, the dust cover material used can be found here: https://a.co/d/0gUQWUzm. In retrospect, I would recommend selecting a material with a smaller hole size to further reduce dust infiltration. If you prefer a different material or thickness, I'd suggest maintaining the same thickness or opting for something slightly thicker.

This design requires minimal support material for the front cover. I recommend printing with a minimum of 3 perimeters and 15% infill.

Tags