Sukhoi Su-26 (toy plane)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small scale model of the Sukhoi Su-26 aerobatic aircraft, more like a toy.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 33
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution
I was with my children (4 and 2 years old) at the F2B 2026 tethered model world cup. They really wanted an aerobatic plane. I looked for a while and finally decided to model and print my own. I chose the Su-26 and simplified it a bit. I hope someone else will like it too.
Printing instructions:
For everything except the fuselage, layer height 0.16 and fill 10 - 20%.
Propeller - infill: 100%
Fuselage - Up to height 9, layer height 0.1 then 0.2 (wings), both parts at once.
Color variations according to mood. I added stripes to the wings when changing the layer height.
It is intended to use a piece of filament as smaller "pins", but in the end I glued it without it.
Note for the elevator: I had a bit of a wobble with the yellow filament (PLA+), but it turned out fine in the end. Green and red are OK. Maybe add a support "for stabilization".