Gladiator Helmet for Skully
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the first in a series of accessories for Skully, found here: https://www.thingiverse.com/thing:2954166 This…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 85
- Makes
- 0
- Views
- 665
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
This is the first in a series of accessories for Skully, found here:
https://www.thingiverse.com/thing:2954166
This was designed for the 2" version, but I'm sure you could scale it for the smaller sizes. Make sure to use supports cause printing was a little tricky. It took a couple of attempts to get it to print right. The nose piece, before reaching the top, is only held in place by the supports. So make sure you pay attention to this when slicing. Scaling it will be extra tricky, I'm sure
Would like to see what others come up with as well. Enjoy!
Print Settings
Printer Brand:
Prusa
Printer:
Prusa Mk2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Notes:
Take note: the nose piece can be an issue. The only thing keeping the nose piece in place during printing is the support material.
Category: Sculptures