Magic Mike - DJI Mini Wizard Disguise
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wizard disguise for your DJI Mini Microphone
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 4
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An addition to my original model, this model provides more options for your DJI Mini Microphone to look stylish and wizardly!
I also included a top hat in case you don't want a wizard, but a fancy bearded man.
Stick it on your shirt!
A step file is included in the original model so you can make remixes!
Printing Instructions:
Layer height: 0.2mm (I use variable layer height on the eyes, arms, and hands for a cleaner look)
Support: None
Brim: Recommended
Assembly:
Watch this video for assembly of the original. You'll need to apply small dabs of glue to fasten everything.
There's no designated spot for the arms, so glue them on however you see fit!
The pieces like the hands and eyes are a challenge to print because of their size and the overhangs involved. Using a brim will help keep them attached to the bed if they keep getting knocked off.
When attaching the hands onto the arms, pay close attention to the orientation of the hand and arm. The arm has a flat side to it and the hole of the hand is keyed to fit on the arm in one direction.
Thank you for your time and consideration on this matter.
For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on Patreon, prints of this model can be used for commercial purposes.
Feel free to join my discord for additional support, questions, or suggestions!
Filaments used in this creation:
Polymaker Charcoal Black Matte PLA
Polymaker Cotton White Matte PLA
Polymaker Earth Brown Matte PLA
Polymaker Fossil Gray Matte PLA
Polymaker Cyan Translucent PLA