1 / 3
Schultüte Stand — 216 mm Conical School Cone Holder — image 1
1 / 3

Schultüte Stand — 216 mm Conical School Cone Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric, support-free stand for a German school cone (Schultüte), with a stable 216 mm spoke base and editable OpenSCAD source.

Rating
0 / 5
Likes
1
Downloads
40
Makes
0
Views
85
Reviews
0

Updated at source:

Model information

Category
Summer
License
Creative Commons — Attribution — Share Alike

A one-piece tabletop stand for displaying a German Schultüte (school cone). The tip slides into an open conical socket, while eight gussets carry side loads into a broad, material-saving spoke base.

Dimensions

Part Size
Complete stand 216 × 216 × 183.6 mm
Socket depth 170 mm
Base thickness 5.6 mm

The 216 mm base was designed for a Bambu Lab P1P build plate with clearance around its restricted edge area. Check the placement and exclusion zones in your own slicer if you use a different printer or plate profile.

Important fit note

The starting geometry assumes a school cone 850 mm tall with a 220 mm top opening and adds 1.2 mm radial clearance. School cones vary, and this fit has not yet been physically tested with a real cone. Before committing to the full-size print, generate the small fit-test coupon from the included SCAD source and try it on the actual paper tip. Increase radial_clearance if it pinches the paper, or reduce it if the fit is clearly too loose.

Loaded stability also depends on the weight and centre of gravity of the filled cone. A heavy cone may need a larger or weighted base.

Printing

  • Print exactly as provided, with the flat base on the build plate.
  • Designed for support-free FDM printing with a 0.4 mm nozzle.
  • Material and slicer settings are intentionally left open for your use case.
  • The geometry and STL mesh were checked, but the full-size part has not been physically test-printed.

Customising and fit test

schultuetenstaender_kegel_216mm.scad is the editable source. The assumed cone dimensions, clearance, base and socket are named parameters near the top of the file. Export the production stand or the small fit test with OpenSCAD:

openscad -D 'part="stand"' -o schultuetenstaender_kegel_216mm.stl schultuetenstaender_kegel_216mm.scad
openscad -D 'part="fit_test"' -o schultuetenstaender_kegel_216mm_fit_test.stl schultuetenstaender_kegel_216mm.scad

Tags