HexDesk — Modular Desk Organizer System (Open Source)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 25mm hex-hole patterned modular system to make creative desk spaces.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
About
HexDesk is a modular desk system on a 25 mm hexagonal hole-and-pin interface. Mix L / S / I brackets, connectors, hex-pins, shelves, a cupholder, and a VESA monitor bracket.
v1.0 includes 33 STLs. Source CAD lives on GitHub.
Print this first
Print one short bracket, one hex-pin, and the single chamfered connector. If they fit, print the rest.
Do not scale the STLs to change fit. Tongue/groove and hole/pin share the same part, so uniform scale breaks the other interface. The release pack is exported at 0.35 mm. Other tolerances require SolidWorks (see the GitHub README).
What to print vs what is sheet metal
200 mm mounting bracket — printable
0.5 m and 1 m mounting brackets — sheet metal only
All L / S / I brackets, connectors, hex-pins, shelves, cupholder, monitor bracket — printable
Clamp hardware (mounting bracket)
Part Name | Description | Link |
|---|---|---|
Heat-set nut | Tapered M6 Nut | |
Socket screw | M6 × 1 flat head 70 mm | |
Rubber bumper | Uxcell 20 × 15 mm M6 female |
Suggested print settings
PETG for anything that holds load (mount, monitor path, pins)
PLA is fine for shelves and the cupholder
0.2 mm layer height, 3–4 walls, 25–40% infill on structural parts
Orient tongues and pins for strength; check supports on grooves
License
CC BY-NC-SA 4.0. Personal prints are intended.
Selling prints or using this in a product: ask first.
Need a part that is not in the pack? Fiverr