1 / 3
Adventure Force Boxer Pro Retained Muzzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adventure Force Boxer Pro Retained Muzzle
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 5
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
This muzzle is a drop-in replacement for the existing one to make it stick out of the shroud a bit more. It is advised to print this in bright orange.
Printer Settings:
2-4 walls, PETG or PLA, 20% gyroid infill. Use supports.
Instructions:
1) Remove screws from the blaster and separate the two halves.
2) Gently lift the existing orange tip out of the blaster.
3) Slide the new muzzle on to the barrel tube and then lay it into the blaster shell so that the tabs on the sides of the muzzle fit the retention brackets in the blaster shell.
4) Reassemble the blaster.