Key Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cozy spot for your keys
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Wall-Mounted Key Holder
Keep your keys organized with this simple, customizable wall-mounted key holder designed for easy installation without screws or drilling.
🧩 Two Ways to Print
Two-Piece Version
Includes a separate base and key pegs
Assemble the pegs into the base after printing
Makes it easier to replace individual pegs if needed
One-Piece Version
Base and pegs are printed as one complete piece
No assembly required
Ready to mount after printing
🧲 Mounting
This design is intended to be mounted using Command-style mounting strips or suitable adhesive. No screws or drilling are required.
Make sure to:
Clean and dry the mounting surface before installation
Use adhesive appropriate for your wall surface
Follow the adhesive manufacturer's weight and curing instructions
Allow the adhesive to fully set before hanging keys
🖨 Printing
The model is designed to be easy to print and can be customized in Tinkercad if you want to change the size, number of pegs, or spacing.
Recommended starting settings:
Layer height: 0.2 mm
Walls: 3–4
Infill: 20–30%
Material: PLA or PETG
Supports: Usually not required, depending on your printer and orientation
⚠ Note
The adhesive is not included with the model. The amount of weight the finished holder can safely support depends on the adhesive/Command strips, wall surface, print material, and print settings.
If you make one, I'd love to see how it turns out! 🗝🖨