Mick Dundee | HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall art | Hueforge
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 16
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are few images more iconic than the rugged Australian adventurer standing beneath a wide-brimmed hat against the backdrop of the endless outback.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x212.42mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
HueForge does not require supports
#000000 PLA Creality Hyper Black Transmission Distance: 0.5
#9e6a4b PLA elegoo Brown Transmission Distance: 1
#ff9100 PLA elegoo Orange Transmission Distance: 7
#ffffff PLA elegoo White Transmission Distance: 5.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #11 (0.96mm) swap to Orange
At layer #13 (1.12mm) swap to White for the rest.