Devil's Warning | Tasmanian Devil | HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tasmanian Devil | HueForge
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 11
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not every voice in the Australian bush sings.
Devil's Warning captures one of Australia's most iconic and misunderstood native animals—the Tasmanian devil.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x120mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm
If you get a warning for floating regions you can ignore it, Hueforge doesent reqire supports.
#000000 PLA Creality Hyper Black Transmission Distance: 0.5
#ff9100 PLA elegoo Orange Transmission Distance: 7
#fefded PLA Creality Hyper White Transmission Distance: 5
#fff2d5 PLA elegoo Beige Transmission Distance: 5.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Orange
At layer #8 (0.72mm) swap to White
At layer #16 (1.36mm) swap to Beige for the rest.