Steve Irwin | Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Steve Irwin | Hueforge - Wallart
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 15
- Makes
- 0
- Views
- 199
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Crikey! This HueForge is a tribute to one of Australia’s most loved wildlife warriors — Steve Irwin.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 128.05x160mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm
#000000 PLA Creality Hyper Black Transmission Distance: 0.5
#9e6a4b PLA elegoo Brown Transmission Distance: 1
#d4b996 PLA anycubic Beige Transmission Distance: 2.3
#eff0f1 PLA anycubic White Transmission Distance: 4.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #11 (0.96mm) swap to Beige
At layer #13 (1.12mm) swap to White for the rest.