Toyota Sienna 4th Gen Comma.ai Comma 4 Mounting Jig / Alignment Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a jig to align Comma.ai Comma 4 adhesive mount below the Forward Recognition Cover on a 4th gen Toyota Sienna
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
This Jig makes it easy to align the Comma 4 adhesive mount on a 4th Gen Toyota Sienna - tested on a 2026 Platinum model.
The top part of the jig fits around the bottom of the Forward Recognition Cover (the shroud that goes over the factory ADAS camera) and then you insert the adhesive mount for the comma 4 into the oval shape.
There are four sizes included in this archive - 55mm, 60mm, 65mm, 70mm offset - thats how far the top of the adhesive mount will be from the bottom of the Forward Recognition Cover.
I used 60mm on my installation. I am using this right angle adapter so I can get the mount higher while still having room to remove the comma 4 for any maintenance:
https://www.amazon.com/dp/B08BYQKJL6
How to customize the offset of the adhesive mount
=================================================
If you open the FDStd file in FreeCAD, you can specify the offset length by changing a single parameter. Go to "DESIGN INPUTS -> PARAMETERS EDIT THESE VALUES", then click on it and change the "Neck Length" to whatever you want, keeping in mind the thickness of the part that goes around the adhesive mount (10mm) and the part that goes below the Forward Recognition Cover (also 10mm). For example, to arrive at a 60mm offset I put in 40mm as the Neck Length since the other pieces are each 10mm - total 60mm offset.
Acknowledgments
===============
I drew inspiration from these other installation jigs/templates I found:
https://www.printables.com/model/1783363-2021-prius-prime-comma-4-alignment-mount
https://publish.obsidian.md/typedbyhumans/Folders/comma/DML+Tool