1 / 5
Crank Rod Holder Adjustable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a crank bar holder you can buy at many hardware stores, but optimized for 3D printing.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 35
- Makes
- 0
- Views
- 316
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I had damaged the wall holder from a roller shutter crank rod. I looked at the part and designed a version optimized for 3d printing.
The holder should be suitable for rods in diameter of 12 - 17mm and the wall distance is adjustable from 32 - 52mm in 4mm steps.
As material I have chosen PETG, with PLA I am not sure if this material would not break if used for a longer time.
One clamp and two clamp mounts are needed per unit.