Mini tripod hex hut head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative head for the mini tripod by Thorin Oakenshield
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 59
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is an alternative head for the mini tripod by Thorin Oakenshield.
It is slightly taller, but unlike the remix by oltas, it's just barely tall enough to fit a standard hex nut, which is more readily available than the original requested square nut. A tapered M6x20mm screw is also used instead of the original 16mm long one. The fit its very tight, you'll need to align the nut with the hole and press it in place with a flat tool (i just used the sides of a pair of tweezers).
If you'd like to use a locking nut, use the remix by oltas.
Only the head is available here, you can find the other parts in the original model.
I suggest printing this (and everything else of the original model) with 100% infill.
The model has been made modified with tinkercad, so the geometry is not the best, but it prints just fine.