iSANMATE Open Plastic Spool Adapter for Filament Storage 2026
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for iSANMATE plastic spools with open center hub to fit the rewinder used in the Filament Storage 2026 system.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
Dimensions used:
Spool Hole Diameter: 57.5
Spool Width: 61.2
Spool Cutout Diameter: 75.3
Spool Cutout Depth: 4.0
Key:
CB = Cardboard
PC = Plastic Closed Center Hub
PO = Plastic Open Center Hub
RS = Reusable Spool
3D = 3D Printed Spool
Print settings:
.20mm Structural
Infill: Gyroid
Supports: None
Source:
Measurements were taken using a digital caliper.
Hole and cutout diameters were measured using the inside jaws.
Spool width was measured by placing the spool on the flat surface and using the depth gauge.
Cutout depth was measured with depth gauge against center hub. Spokes are slightly lower and do not touch adapter.
In all cases, multiple measurements were taken and averaged.
Photos:
Adapter in spool to make sure it fits
Spool in assembled test lid to make sure it spins freely
Spool without adapter showing open center hub (has spokes)