1 / 2
SMD Component Tape Magazines — XL size, anti-release lip, and a label maker — image 1
1 / 2

SMD Component Tape Magazines — XL size, anti-release lip, and a label maker

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magazines for SMD parts on cut tape, in three tape widths and two capacities, on a rail that takes 26 of them per 300 mm

Rating
0 / 5
Likes
3
Downloads
19
Makes
0
Views
79
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Share Alike

Cut tape is miserable to store. Loose in a bag it curls, tangles and loses its own label, and you end up counting parts through the cover tape with a torch. These are magazines: the tape coils inside, feeds out through a slot, and a sprung slider holds it where you left it.

This is a remix a few generations down. @LordAsdi designed the original, T. Wirtl (tobi) rebuilt it as parametric OpenSCAD, and Bryan Varner's Varnerized Edition is what I started from. What I added:

An XL size. The standard holds roughly 800 of 0603. The XL holds about 1600 — same mechanism, bigger coil pocket, on its own slightly wider rail.

An anti-release lip, so a magazine cannot walk off its rail. The idea is from Robin Reiter's "SMD Magazines G2" video; the mechanism here is my own — a full-depth flap rather than a cantilever.

A two-colour size badge. The tape width is moulded into the front on a second filament — already assigned in the file, so it loads that way — so a rack of mixed widths reads at a glance. It is a second part of the body object rather than a separate object, so a slicer's Arrange cannot slide it out of its recess. Single extruder? Delete the badge part and swap filament at layers 2 and 3.

A 300 mm rail. Prints standing in 302 mm, which an H2D takes. 26 8 mm magazines per rail instead of 8. Its leaf spring ships as 3 × 100 mm segments that butt end to end in the channel — past about 100 mm, a 0.8 mm printed ribbon curls off the bed and is a nuisance to thread.

A label maker, below.

What is in the download

STLs and plain core-spec 3MF — geometry and filament assignment, nothing else. No slicer profile is baked in, so import into whatever slicer you use and apply your own settings. A PDF of the assembly instructions is included.

Magazines come in a 0.4 and a 0.6 nozzle variant. The badge recess is cut exactly one first layer deep, so its depth is a property of the nozzle — take the folder matching yours. The rails suit either.

What you need besides the print

Per magazine: 4 × M2.5 × 6 mm countersunk screws, hex drive (into 2.05 mm holes), 1 × M3 × 16 mm button head (ISO 7380, the coil spring's guide), and a compression spring about 4 mm outside diameter, 20 mm free length, 0.4 mm wire. Everything threads straight into the plastic — no inserts, no nuts. The rail's leaf spring is printed.

The label maker

Scan a reel barcode with a USB scanner, or paste a code, and it tells you which magazine to print for that part and generates a two-colour label card sized to the slot.

https://www.meshmeld.com/smd-magazines/

It reads DigiKey and Mouser Data Matrix, LCSC/JLCPCB QR and bare part numbers, works the tape width out of the package and standard-against-XL out of the reel quantity, and checks the lettering is coarse enough for your nozzle before you print it. Nothing is looked up online — the barcode already carries the part number and the quantity — so it works on a bench PC with no internet.

Source

Parametric OpenSCAD, and the tooling that builds every plate: https://github.com/infamy/smd-magazines

Also credited

The remix links cover @LordAsdi's original and Bryan Varner's edition. Two more belong here that Printables has nothing to link to:

• T. Wirtl (tobi) — rebuilt the original as parametric OpenSCAD, CC-BY-SA 4.0. That code is what this is built on, and the share-alike comes from him.

• Robin Reiter — not a code ancestor, the inspiration for the release lip.

Anything you make from this carries the same licence and the same credits.