Great Wall of China - Ridge Section with Watchtowers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 152 mm section of the Great Wall climbing four rocky ridges, with towers and an arched gate.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Standard Digital File License
A section of the Great Wall climbing four rocky ridges, printed as one solid piece. The rampart is built as three masonry courses with a walkway running between two crenellated parapets. Four two-storey watchtowers stand on the crests, with coursed stonework, eaves, corner and side merlons, blind window niches and ground-floor arrow slits. Two of them carry a pyramid-roofed pavilion, and a full arched gate passage is cut through the central tower. Fractal rock relief keeps the ridges reading as stone rather than smooth hills.
Size: 152 x 62 x 66 mm
Filament: Matte Sand, Grey or Stone PLA
Infill: 10-15% Gyroid
Layer height: 0.16-0.20 mm
Walls: 3
Supports: Not required
Brim: Not required