1 / 1
Breakaway Wooden Tankard: Magnetic Shatter Prop — image 1

Breakaway Wooden Tankard: Magnetic Shatter Prop

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Breakaway wooden tankard for the stage. Shatters into 6 shards, magnets hold it together, reusable.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
30
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial

I needed a breakable mug for our production of Young Frankenstein for the scene where the Hermit smashes his tankard. Couldn't find anything out there that worked, so designed one instead.

It's a wooden style barrel tankard that shatters into 6 irregular shards on cue when force applied to the opposite side of the handle, then snaps right back together with magnets for the next performance. Every break edge is a designed surface, so it's safe to hand to an actor and snaps back together in seconds for the next performance.

How it works

The mug is cut by a 3D Voronoi pattern, so the break lines are irregular and all over the body — like a smashed pot, not clean stacked rings. Every pair of touching shards gets magnets on their shared face, spread out along the length of each face so the hold is even. There are 12 shared faces and 21 magnet positions in all.

The handle is deliberately not part of the shatter. It's a single solid piece, permanently fused into one shard at the bottom (no magnet down there), with one magnet at the top so the tip pops free when the mug breaks and self-locates back onto the body afterward.

Specs

  • Overall size: 141 × 104 × 164 mm

  • 6 printed pieces, ~540 cm³ total

  • Wall thickness: 10 mm

  • Magnets: 44 total — 6 × 3 mm neodymium discs. Pockets are modeled at 6.2 mm for a snug press fit. I got a pack of these and they worked great. https://www.amazon.com/dp/B0CDGYBJT2

Printing

  • 0.2 mm layers, 3–4 perimeters (for impact resistance). 15 to 20% infill is good, but 40% will give it a more solid sound when hitting the stage.

  • Piece 6 carries the handle and does not detach from the part of the base. Only supports I needed to use were for the handle.

Enjoy! If you build one, I would love to see it!