Philips OneBlade combs guards various sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Philips OneBlade combs/guards or various sizes. FreeCAD and STEP files included to edit if you like. No supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
These blades use less than 1g of filament and only take a few minutes to print. Supports are not required. I recommend 0.16 layer height but will print OK with a layer height of 0.2mm or less.
I used PETG which is flexible because the base is thin. Sizes 2mm to 9mm but the FreeCAD file is included. Just change the height in the VARS to automatically resize the colmb height. You can also resize the blade base (height, width and depth) using the vars, in case your printer does not print the same as mine.
The guard attaches to the corners of the OneBlade. It is a secure fit, you may need to pinch the comb to bend it slightly to get it on and off the OneBlade. If you don't like it, you can change the width of the comb in the CAD and make it a looser fit.