Hero Me Gen 5 Mount for PrinterMods LED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a clean mount for the PrinterMods LED bar that would fit between the ducts of my single 5015 Hero Me, so I…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I wanted a clean mount for the PrinterMods LED bar that would fit between the ducts of my single 5015 Hero Me, so I grabbed Stokrota74's mount and this: https://www.thingiverse.com/thing:3424966 and made one.
There's a slot to ziptie the mount to the duct.
I also found the LEDs make a super bright reflection on my glass bed so I made a diffuser.
Print Settings
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2
Notes:
The bar should be printed on end with supports, the lens should be printed with the flat end down.
Any material should work since the parts aren't close to the heater. Obviously the LED lens should be printed in white to let light though. I used PLA for the lens, I think the bar is PETG because it's what I had on hand.
Category: 3D Printer Accessories