MOLLE/PALS library: patch base - form B
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
the base shape for PALS patches, with belt opening in “form B”
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Shape for further customization, for example to create patches with emblems to show on your backpack or vest. Import in FreeCAD or any other software.
The belt openings are in “form B:” In goes the long leg first, pinch the belt up and over the short leg; twist the patch and repeat on the other side.
Prefer this form for vertically mounted patches, such as on shoulder straps.
FDM Print Recommendations
By design the face itself is not at the same height as the belt allowance—you will need supports.
Designed to be printed with a 0.2mm or 0.4mm nozzle.
6–4 walls, until the legs are 100% walls
20%+ infill
The ideal material for this is: PA66, ASA, or Prografen PET-G Graphene Light
… else use something with a good layer adhesion (>24 MPa) and UV-resistance
Workflow tips and tricks for FreeCAD:
After importing the STEP file (or whatever else), to add onto it:
switch to “Part Design”
create a new part and make it the active part
click on the face(s) you want to attach your design and use “sub-shape binder”
hide the imported item
draw your sketch on the sub-shape binder
… or: the face to draw on (with all my patches) goes up to +3mm height. Start your design at that height.
… or: Select the imported item, then click on “new body:”
It will be taken over as ‘BaseFeature’ that you can edit freely.