Thick wall hook, leafblower wall holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows you to store a leafblower on a wall to save space.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
A thick hook with a mounting plate, 2 screw positions (5mm diameter). The holes allow for some movement in one direction to make alignment easier.
I made it to hang up an electric leaf blower (mine is ~3kg), but it can be used for other things as well. The one in the pictures is an earlier version, where one of the screws is hard to access, so the published version has the mounting plate rotated.
Printing: I strongly suggest you orient the model as in the picture to spread the load in XY plane. I put very conservative settings into the 3mf, but you can optimize them as you want. My version was done in 6 perimeter, 30% gyroid infill at 0.28mm layer height and is holding up just fine after months. I'd recommend at least as much perimeter/infill configuration. I printed in PETG, but stronger materials are definitely a bonus.