Riser for Das Keyboard 4 Professional
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple riser to angle the Das Keyboard 4 Professional at a slightly steeper angle and attaches to the red ruler.…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 90
- Makes
- 6
- Views
- 667
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple riser to angle the Das Keyboard 4 Professional at a slightly steeper angle and attaches to the red ruler.
Without this riser the keyboard has an angle of about 4 degrees and with this riser the angle becomes about 10.7 degrees. It is more comfortable to type for me. This riser increase the height underneath the ruler by 15 mm.
Instructions: Print 2 of this model > align one edge with the ruler, push and the riser will snap in place around the ruler.
VERY IMPORTANT: the riser is not symmetric as the flat base is not parallel with the ruler. Make sure that both risers are in the same direction when you put them on the ruler.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
35
Filament: Creality PLA Black
Notes:
Print takes about 1 hour for 2 risers at a print speed of 85mm/s.
Category: Other