1 / 2
Golden Snitch Display Box — image 1
1 / 2

Golden Snitch Display Box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Box to display a golden snitch model

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
88
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

This is a display for Josemari's Golden Snitch with flexible wings on Maker World.  It is supposed to look like the snitch is just hovering above the box ready to fly. 

 I wanted something to display the very cool print with and came up with this.  I think it could be used for other snitch models as well.

 The .3mf files are from OrcaSlicer for Bambu Lab A1 using 3 colors (AMS) printing with .4 Hardened steel nozzle (due to printing with wood PLA) and on a Smooth High Temp plate.  The .3mf files include the colors and the red liner is fuzzy to look like felt.

 I printed the box and lid with GeeeTech Gold Silk PLA, eSun Fire Engine Red PLA Basic, and elegoo Walnut Wood PLA.  

 Hinges were with GeeeeTech Silver Silk PLA

 The support to hold the snitch up is out of the eSun Fire Engine Red PLA Basic.

 The .stl files are completely raw, exported from FreeCAD to .stl so no colors - paint in your slicer to your desired liking.

 The holes in the lid and box have a small piece of filament that crosses them in my slicer.  This was easily removed with an exacto knife.  The hinges are tight fit to support the lid solidly.  You may need to mildly trim the edges or sand just slightly to get them to slide in the holes.

 The support is printed with no brim and should fit snuggly into the slots in the box to hold the snitch up.

 Please feel free to ask questions or make suggestions.  

Tags