Servo Box - Wing Mount - EMax ES 9051 4 gram servos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and very light wing mount servo box for a EMax ES 9051 4 gram servo. The servo is not glued in, it is a press…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 82
- Makes
- 0
- Views
- 609
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Simple and very light wing mount servo box for a EMax ES 9051 4 gram servo. The servo is not glued in, it is a press fit and doesn't move. Glue the box in the wing, install the servo, screw on the lid and done. Takes #2 3/16" screws. Holes in the lid (not the box) may have to be enlarged, but depends on what screws you use.
Left and right versions so you can adapt wire lead direction.
Print Settings
Printer:
Artillery X1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
Hatchbox PETG but anything works PETG or PLA
Category: R/C Vehicles