1 / 5
VFC AK bits and bobs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My bits and bobs for VFC AKs
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Some small bits and pieces I've designed for my VFC AKs to either install or fix stuff.
The LCT and 5KU PT-* step files are meant for CNC machining, I've had great success with mine made from 6061 alu with a hardcoat anodized finish.
Be aware that if you get the part hardcoat anodized you may need a 4,5mm reamer to remove some coating from the pin hole. You can also modify the STEP file and make the hole 0,05 to 0,2mm larger in diameter (JLC state their hardcoating is 25-100 microns thick).