TP-Link Deco XE75 Wall Mount — Cable Management — Support-Free
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for TP-Link Deco XE75 with cable access and ventilation. Designed for easy, support-free printing.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
TP-Link Deco XE75 Wall Mount
A clean, compact wall mount designed specifically for the TP-Link Deco XE75 AXE5400 WiFi 6E Mesh System.
This original Yutaka3DLab design securely holds the Deco XE75 while keeping the power and Ethernet connections accessible. The open design provides space around the device for ventilation and includes a bottom opening for convenient cable routing.
I designed, prototyped, printed, and tested this mount using a real Deco XE75.
Features
Designed specifically for TP-Link Deco XE75
Secure wall-mounted design
Open design for ventilation and cable access
Easy access to power and Ethernet connections
Bottom opening for convenient cable routing
Support-free print — no supports required
Simple installation with three mounting screws
Designed and tested with a real Deco XE75
Included Files
STL — ready for slicing
3MF — provided for convenient printing
README.txt — model and compatibility information
Printing_Settings.txt — recommended print settings
LICENSE.txt — license and usage terms
Recommended Printing
The model was designed to print without supports in the recommended orientation.
Layer height: 0.20 mm
Infill: 20%
Supports: No
Material: PLA / PLA+ recommended
I personally printed and tested the design in PLA+.
Installation
Drill the mounting holes, insert suitable wall anchors, and secure the mount with screws.
Route the power and Ethernet cables through the bottom cable opening.
Connect the cables and place the Deco XE75 into the mount.
Compatibility
Designed and physically tested with:
TP-Link Deco XE75 — AXE5400 Tri-Band WiFi 6E Mesh System
Please verify your Deco model before printing. Compatibility with other Deco models has not been tested.
Dimensions
Approx. 147 × 111 × 63 mm
(5.7 × 4.4 × 2.5 in)
Please Note
This download contains digital files only. No physical mount, Deco device, cables, screws, wall anchors, or other hardware is included.
Minor differences between printers, materials, and slicer settings can affect final fit.
Trademark Notice
TP-Link and Deco are trademarks of their respective owner.
This is an independently designed Yutaka3DLab accessory and is not affiliated with, endorsed by, or sponsored by TP-Link.