PowerPole splitter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple PowerPole splitter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Stacked PowerPole connectors almost perfectly line up with vertical Wago 221 connectors allowing a simple setup to split power. Can be modified to use 4 or 5 terminal Wago connectors for more splits.
This uses bare 10 gauge solid copper wire but 12 gauge will work also. The cover is a bit tight and I had to use a rubber hammer to press-fit (hammer-fit) it on. Probably can have a little more tolerance and use a bit of glue instead.
Added a 4th pic if you want to make it even more compact. You'd need to modify the model by expanding the opening to 3 ports, chopping the height down a bit and removing the port opening on the back side. This was my initial design, but I didn't like when it was connected to actual wires that the source wire supplying the power had to loop back around the splitter. Bending the source PowerPoles to face the other way makes it fit more inline with my wiring setup.