Stitch Head Keychain — 36 mm Chibi Charm

Ear to ear, the widest charm in the series — and the shortest.

A chibi Stitch head keychain — one solid piece with the hanging loop modelled into the top, so

there is nothing to glue and nothing to assemble. The face, the nose and those enormous ears are

cut into the geometry rather than painted on, so they still read at keychain size and after a coat

of paint. The file is already at keychain scale: 35.9 × 21.8 × 23.6 mm, print it at 100 % and the

loop comes out right.

The photo is a real print of this exact file at 100 % — raw grey PLA, straight off the plate, no

filler and no paint.

Why you will like it

- One piece, no assembly — the loop is part of the print, and so are the ears. Add a split ring and

it is done.

- The loop hole is 4.5 mm — measured in the file, at 100 %. A standard 20 × 1.2 mm split ring goes

straight through with room to spare — no drilling, no rescaling, no fused loop.

- Wide and flat, so it hangs well — 35.9 mm across and only 21.8 mm deep. It lies flat against a

bag instead of rolling, which is more than most head charms manage.

- Watertight and slicer-safe — a single closed solid, zero open edges, 179 928 triangles. No repair

step, no manifold warnings.

- Looks good in any colour — character colours if you have an AMS, or raw grey PLA like in the

photo. The recessed face takes a wash beautifully: brush a dark colour over the whole head and wipe

the high spots.