1 / 2
ArmyPainter Speedpaints 2.0 Gridfinity Bin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ArmyPainter Speedpaints Bin for Gridfinity Drawer
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple Gridfinity Bin to hold ArmyPainter Speedpaint Bottles. 25mm Diameter and 77mm height. Might also fit Vallejo Colors.
Don't mind the mediocre print quality on the Picture. I used cheapest and wet PLA to testprint at 0.6mm Nozzle. This will work with 0.4 nozzle and 0.2mm layer height with no problem.
GCode-Files for time and filament consumption reference only. Printed on a CoreOne+ with 0.6mm Phaetus SiC hardened Nozzle. No need for supports, 10% infill is plenty. I used gyroid infill.
3mf files are generic so your print profiles won't get messed up.