1 / 2
Blank Flat Print Woggle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Blank Flat Print Woggle Prints 5mm thick
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
40 mm face woggle blank to allow customization. Fusion360 file provided. Put your design on the face and extrude.
Aim for USPS Letter compatibility (under 1/4 inch thick) to allow mailing in the United States. Print is 5mm tall.
Prints in one piece that breaks apart to create a woggle. Tension fit can be glued, but is not required.
Print face up to achieve different colors by layer or with a multicolor printer.
Spec | Recommendation |
|---|---|
Nozzle: | 0.4 mm or less |
Layer Height: | 0.12-0.2 mm |
Infill | 10% minimum |
Parameters/Walls | 2 minimum |
Supports | Not needed |
Bridging | Min 8 mm - Max 15 mm |