1 / 6
ReMIX35 Printed Parts for Prusa MK3S/MK3S+ & Bear Upgrade — image 1
1 / 6

ReMIX35 Printed Parts for Prusa MK3S/MK3S+ & Bear Upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printable PETG parts for installing ReMIX35 on Prusa MK3S/MK3S+ and Bear Upgrade printers.

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
95
Reviews
0

Updated at source:

Model information

License
GNU General Public License v2.0

ReMIX35 Printed Parts

This collection contains the 3D-printable mechanical parts required to install ReMIX35 on an Original Prusa MK3S/MK3S+ or a compatible MK3S/MK3S+ Bear Upgrade.

ReMIX35 was designed around a simple principle: change only what is necessary to integrate the new electronics while preserving as much as possible of the original printer, its mechanical layout, and the familiar assembly experience.

For that reason, many of these parts are based on existing Prusa MK3S+ or MK4 designs. Some are used without modification, others were adapted to accommodate the ReMIX35 electronics, and a small number were designed specifically for the project.

All parts were designed to be printable in PETG on a standard MK3S/MK3S+ before starting the ReMIX35 upgrade.

Standard and Bear configurations

Most printed parts are shared between the standard MK3S/MK3S+ and Bear Upgrade configurations.

Only four part types require Bear-specific versions:

  • Einsy-base-remix35-bear

  • LCD-support-left-bear

  • LCD-support-right-bear

  • mk4-cable-holder-bear

The remaining printed parts are common to both configurations.

Printed Parts by Configuration

Printed part

Standard MK3S/MK3S+

Bear Upgrade

Qty.

LCD-cover-remix35

✓

✓

1

LCD-knob

✓

✓

1

LCD-led-cover

✓

✓

1

LCD-spacer

✓

✓

2

Einsy-base-remix35

✓

—

1

LCD-support-left

✓

—

1

LCD-support-right

✓

—

1

mk4-cable-holder

✓

—

4

Einsy-base-remix35-bear

—

✓

1

LCD-support-left-bear

—

✓

1

LCD-support-right-bear

—

✓

1

mk4-cable-holder-bear

—

✓

4

The Bear configuration therefore does not require a completely different printed-parts set. Most components remain common, while only the parts affected by the different frame geometry are replaced with Bear-specific versions.

Einsy enclosure and ESP-01S access

One of the most extensively revised parts is Einsy-base-remix35.

ReMIX35 adds an ESP-01S Wi-Fi module, a component that was not present on the original MK3S/MK3S+. During the enclosure design, we wanted the module to remain physically accessible so it could be removed or reinstalled without disassembling the complete electronics enclosure.

To achieve this without adding separate hardware, the Einsy base incorporates a simple print-in-place access door with an integrated locking knob.

The geometry and clearances of this mechanism were developed with the printing capabilities of a standard MK3S/MK3S+ in mind.

Display assembly

The display enclosure combines parts derived from the Prusa MK4 design with components developed specifically for ReMIX35.

The printed assembly includes the LCD cover, left and right supports, encoder knob, LED cover, spacers, and cable-routing guides required to mount the ReMIX35 Display Board and 3.5-inch LCM.

The cable holders follow the routing concept used on the MK4, but were adapted as 3D-printable parts so they can be produced together with the rest of the ReMIX35 hardware.

Optional two-color LCD cover

A two-color version of the LCD-cover-remix35 is also included.

This version is prepared as a 3MF project for a standard single-extruder MK3S/MK3S+. The color change is performed through an assisted filament change, so an MMU2 or MMU3 is not required.

This is purely an optional cosmetic variation and is not necessary for the ReMIX35 installation.

Included files

The download includes:

  • STL files for direct slicing and printing.

  • STEP files for inspection, modification, or adaptation of the mechanical parts.

  • 3MF files for prepared print projects and configurations where applicable.

Material

The parts were designed for printing in PETG.

PETG was selected as the intended material for the ReMIX35 printed components and was taken into account during the development of the parts, including the print-in-place features and assembly clearances.

Open-source project

ReMIX35 is an open-source electronics upgrade for the Prusa MK3S/MK3S+ platform.

Project files, electronics documentation, and additional information are available in the ReMIX35 GitHub repository:

https://github.com/sudotek-dev/ReMIX35

Tags