Dremel Workstation Drill Press to Suction Cup Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will adapt the Dremel Drill Press workstation 220-01 to the Harbor Freight Aluminum suction cup. I needed this to…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This will adapt the Dremel Drill Press workstation 220-01 to the Harbor Freight Aluminum suction cup. I needed this to cut holes in glass windows allowing the moisture to vent out.
You will need to drill out the holes on the suction cup handle, Harbor Freight made it easy by marking the locations. I used a #10 24x1inch screws and washers. As seen you will also need to remove the dremel worstation backing plate, this is accessible behind a few plastic covers held with T10 screws.
https://www.dremel.com/en_US/products/-/show-product/tools/220-01-workstation https://www.harborfreight.com/4-58-in-aluminum-suction-cup-lifter-110-lb-57500.html
Print Settings
Supports:
Yes
Category: Hand Tools