Cr-10S Pro/Cr-10 Max TFT35 V3.0 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Best of both worlds: Touch screen display + emulated 12864. I designed this in anticipation of upgrading my machine to…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 542
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Best of both worlds: Touch screen display + emulated 12864. I designed this in anticipation of upgrading my machine to a 32-bit board (SKR Pro) and TFT35 V3.0. Uses the concept and mount plate from Nitec0re's design, but pretty much a redesign from there up. ~~I don't have the parts yet, so I'm not sure yet if everything fits.~~
Update 6/12/19:
Minor rework on TFT35_Mount_v3.stl file to reduce the gap between it and the case.
Update 19/1/2020:
I probably should have mentioned you will need 12 m3x6 screws. See comments section for brief assembly instructions.
Update 29/1/2020:
Finally got the board in my hands and modified several things: Enlarged both SD card and USB openings; relocated mount holes that were interfering with board plugs; relocated cable feed slot
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Resolution:
.4
Infill:
20
Filament: Overture PETG Red
Notes:
Support required for mount, but may not be necessary for the case - it depens on whether your printer can handle a 25mm bridge. Be careful removing the support from the mount; the bottom brace is somewhat thin.
Uses stock hardware to attach the mounting plate inside the machine case.Mount with the cutout toward the bottom of the printer. Requires 4-M3x6 screws to attach the board to the case, 4-M3x6 screws to attach mount to the plate and 4-M3x6 screws to attach case to mount.
Category: 3D Printer Accessories