Another Backgammon Set

Backgammon Game, the main thing that sets this apart is it helps keep tiles from sliding around while still using the traditional feel of tiles.

Designed for single color printers.  A touch glue holds the multi color inserts in place.

Printed one already posted, but it did not have the features I liked. So.... made one with a little more material in it so the board feels more substantial and not flexy.  It also has a spot to put captured tiles across the center.  I wanted to make the tiles less apt to slide around so added pocketed guides to help hold tiles in place.  I also liked the side storage for tiles rather than loose inside.  I was just going to use a rubber band to hold it closed but added a slot and clip that locks it shut.  

In the end I made up most of the accessories like die cups and dice. Board size is 230x170mm, so for some printers you may need to scale it to 90% in the slicer for some smaller printers.  My thought on dice is use some real ones or print these and just drop paint in the holes.  IF you are a glutton for punishment glue in the dots.  LOL  I did not create a doubling cube but here is one already out there...

Print Inventory

Board - 2

Chip - 30, 15 of each color

Clip - 1

Cup - 2, 1 of each color

Dice - 4, optional Diedots 84, reverse the colors to make 2 pairs

HingePin - 3

Inserts - 24, 12 of each color