1 / 6
Rubin Vase Brooch — one silhouette, two pictures — image 1
1 / 6

Rubin Vase Brooch — one silhouette, two pictures

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One silhouette, two pictures: a flower vase, or two capybaras nose to nose. Magnetic back, no pin.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
9
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A brooch that is a flower vase, and is also two capybaras.

There is one silhouette curve in this model, read two ways. Take the cream shape as the figure and it is a footed trumpet vase with a bouquet rising out of it. Take the brown around it as the figure and the same edge is a capybara in profile — heavy jowl, blunt squared muzzle, a shallow stop, the high flat forehead — facing its twin. The vase's waist IS the animal's snout. Not styled to resemble each other: the same numbers draw both.

Plaque 48.6 × 61.0 × 6.0 mm · backer 32 × 18 × 6 mm · ≈18 g of PLA for the pair.

the printed brooch, and the backer that goes behind the fabric

Why a capybara, and not a cat

The classic version of this illusion hangs on a human nose, and a nose is one feature — so a silhouette that has to be two things at once has only one place to succeed or fail. A capybara is carried by three features, and they land on three different parts of the drawing:

  • the blunt muzzle is the near-flat run in the profile — which is also exactly what gives the vase its narrow waist;

  • the small round ear is a bump on the brooch's own outline, not a decoration painted on its face;

  • the eye sits high and far back, where the vase reading sees only a bead on the shoulder.

Take any one of the three away and the head stops being a capybara and starts being a bear. That is why the plaque is not a rounded rectangle: its left and right edges are the back of each head — nape, skull, ear, crown. Put this artwork on a rectangular plate and the illusion dies.

the two readings, flat on

Two printed pieces, seven named solids

Import capybara_vase_brooch_mc.stl → right-click → Split to Parts → assign a filament per part.

exploded — every solid, in mating order

solid

filament

role

plate

colour 1

the plaque — and, in the other reading, the two animals

vase

colour 2

the vase silhouette, flush inlay 0.6 mm

bouquet

colour 3

stems + five blooms rising past the rim

accent

colour 4

belly band + the two eyes, welded together by a buried web

seals ×2

colour 1

the plaque's two magnet lids

backer

colour 1

the plate that goes behind the fabric

backer_seals ×2

colour 1

the backer's two magnet lids

Coordinates are preserved exactly, which is the point — a 0.6 mm flush inlay cannot be re-registered by hand. The per-part STLs ship alongside if you would rather place them yourself.

Four colours, and the colour bill is almost nothing: all four live in the bottom 0.6 mm, so only three layers are bi-colour and the purge is about one gram. Ink volume is free; ink height is the whole bill, and this design has none.

The bouquet is a single solid, so it takes a single filament — a gradient filament there gives the two-tone blooms in the photos for free.

Printing

Front face DOWN, exactly as exported. The front carries all four colours and prints against the bed: the cheapest place for a colour change and the crispest, since the bed finishes the inlay boundary better than any ironing pass. Nothing overhangs.

 

value

Orientation

front face down, as exported

Layer height

0.2 mm — the pause layer number assumes it

Supports

none

Walls / infill

3 walls, 15 % (the parts come out near-solid at this size)

Plate

plaque + backer together — one plate, one pause

Turn ironing OFF: the bottom three layers hold four filaments, and ironing a bi-colour face drags one colour across the other.

⏸ The pause — Z = 5.0 mm, after LAYER 25 of 30, at 0.2 mm layers

The magnet pockets end sealed — the magnet is fully enclosed and no part of it shows in any finished face. That is only possible if the magnets go in mid-print.

Right-click the layer slider at layer 25 → Add Pause. One pause serves the whole plate: the plaque and the backer share the same pocket depth on purpose, so all four magnets go in at the same moment. Both pieces sit flat on the bed, so the slicer's z and the model's z agree here.

Check the layer preview shows four open circles before you commit. If you miss the pause the print is not scrap: the pockets are Ø5.3 mm and sit 1 mm under the back face, so a 5 mm bit takes the seal off cleanly — you lose the sealed look on a face nobody sees.

Polarity — the step that actually goes wrong

Four Ø5 × 3 mm neodymium discs, and exactly one arrangement works. Two ways to get it wrong:

  • all four the same way round → plaque and backer repel, and it will not hold at all;

  • one of a pair flipped → one station attracts and the other repels, so the brooch sticks and then pivots on the good magnet and hangs crooked. This is the sneaky one: it feels fine when you test it with a fingertip.

While the printer is paused:

  1. Let all four magnets stack themselves into one column — they are now alternating N-S-N-S, which is what you want.

  2. Split the column into two pairs. Each pair is a plaque magnet and its backer partner, already correctly oriented.

  3. Pull a pair apart and mark the two faces that were touching. Those two must end up facing each other across the fabric. Same for the other pair.

  4. Drop both plaque magnets in with the marks facing UP. Both of them, same way.

  5. Drop both backer magnets in with the marks facing UP as well.

  6. Before resuming, hold the backer over the plaque as it will sit in use. It should pull in flat, hard, and refuse to rotate. If it snaps to one side and lifts on the other, one magnet is upside down — pull it out now, while the pocket is still open.

Resume. Five more layers close all four pockets.

the finished back — two seals on the plaque, two on the backer, all four magnets buried

Wearing it

Plaque on the outside of the fabric, backer behind it, slide the pair where you want it. No piercing, so it is safe on knitwear, silk, a lapel, a canvas bag, a hat. The two stations are 22 mm apart specifically so the brooch cannot rotate on a single pivot.

plaque and backer

Two magnets across a fold of fabric is a firm grip, not a permanent one. It holds this 20 g brooch on a shirt or a coat lapel all day. On something thick — a heavy wool coat, a padded jacket — the extra gap costs a lot of force, because the pull between two discs falls off roughly as the fourth power of the gap. Test it before wearing it out.

⚠ Keep the magnets away from pacemakers, and away from phones, cards and watches. Four small neodymium discs are not toys — do not leave a loose one where a child or a pet can reach it.

The .scad is included. The silhouette is a plain table of [height, half-width] pairs, so you can redraw the animal — or the vase — by editing numbers.

Tags