1 / 1
Thermaltake T900 - USB C Front Panel Replacement — image 1

Thermaltake T900 - USB C Front Panel Replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Front Panel Replacement that Gives you 2 USB3.2 and 1 USB-C port, for the Thermaltake T900 Case.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
20
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

Included is both a Print Ready STL file, as well as a Solidworks Model if you want to edit it.

Purchased Separately is the GRAUGEAR 20Gbps USB3.2 Gen2x2 USB-C Front Panel Adapter which I procured to get the USB C port, as well as 2 x USB3.2 Ports (The USB 3.2 ports in my case got damaged at some point so needed replacement anyways).

The Front Panel on the T900 has a PCB behind the Front Panel, that would need to be Split into 3 Sections.
From Left to Right, you have the Reset Button, then 2 x USB3.2 Ports, then The Front Panel Audio, then another 2 x USB3.2 Ports, then the PowerButton with Indicator Lights.

You want to cut the PCB, so you end up with the Reset Switch, the Front Panel Audio & The Power+Indicator Buttons as 3 smaller PCB's. Be Careful when cutting these, so you don't cut into the existing PCB traces. There is Clear space on the PCB between Reset button and Fist USB pair - Where you will make the first cut using a hacksaw or dremel. Make sure you include the Screw hole closest to the Reset Circuit, so you have something to mount the Reset PCB to.

For the Front Panel Audio, Cut between the First USB pair, and the second USB pair.

For the Power Button, Cut between the Second USB pair and the Power Button Circuit.

You should be able to spot the blank pieces on the PCB. Use common sense, don't cut traces. If you break it I take no responsibility.

After you've ended up with 3 Separate PCB's you can unscrew the USB 3.2 and USB C terminals from the GRAUGEAR Front Panel Adapter, and use the same screws to connect them the 3D Printed Front Panel.