1 / 1
Vacuum hose (41mm) swiveling coupler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Swiveling coupler for standard 41mm vacuum hoses (Bosch, Festool, Eta, whatever).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Print istructions
PLA
0.6 nozzle
0.2 layer
3 perimetes
30% grid infill
concentric bottom and top infill
print orienting hose thread opening to the bed
Assembly
O ring 38mm ID, 3.5mm diameter
Silicon grease
Lube both O ring grooves on the male and female part
Then insert the O ring to the male O ring groove and add more lube
As usual insert the male part to the female one ... this requires quite a force, pressing it with vise is recommended