Adjustable + Customisable! Fantasy Vendor Stall for Fairs and Cons!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular Fantasy Vendor stall for artisans!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 0
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Portable, Repairable, Adjustable and Customisable Gridfinity and Ikea Skadis Compatible Vendor Stall for fairs!
Info:
- 60cm long by 70cm - 100cm + (Adustable width fits any size!)
- .3mf files with the Figurine in the pictures
- Assembly requiered with no glue (check BOM
- Bridge is removable and can fit different custom designs for any size
- You are not allowed to resell the 3D files.
- Don't have a big enough printer? Contact me for orders!
- .f3d File can be provided on request.
Printing materials:
- PETG or ASA or ABS (I prefer PETG bc of less warping)
- Colors : 4
- Multicolor printer not necesary but some detail will be lost if you remove colors. (Prinarly the rooftops have a dark base, this is multicolor to save materials and add more strength however it will look just fine with only one color)
Credits & Disclamers
- The gridfinity files are provided as extra pre-sized and they can also be aquired for free.
- Gridfinity is credited to Zack Freedman! <3
- The pegboard is Skadis compatible, meaning that the holes line up however it has diferent profiles from the Ikea ones, It should work with Ikea original addons!
3D printing settings
Compatible by default with 400mm by 400mm by 450mm printers however you can slice it to small bits glue them and it will still have full normal functionality. it may use more filament this way. If you want it done one a bigger machine properly contact me for help!
BOM For 0.6mm nozzle:
- Large Tower + Gridfinity Boards: 3.5kg
- Small tower + Bridge: 3kg
- Large tower Roof: 1kg
- Small Tower roof: 1kg
(Rounded up to nearest <+0.5kg) ( With a 0.4 nozzle you will use less however I dont recommend that because of structural issues)
Screws for assembly: 34 pcs -> 4mm wide screws I use 60mm long and screw them untill they hit the end not all will fully screw but you can feel it when it reaches the end
Settings (Already in the .3mf file!):
Do not print with variable layer height! in large prints it will result in visual discrepancies!
Layer height 0.28
2 walls, 3 shells (top and bottom)
7.5% adaptive cubic! (Best way!)
No supports
If you want to use it for commercial use (go to fairs with it or other for profit markets & others) you will need an ACTIVE Club subscription for COMMERCIAL LICENSE! (2nd Tier, this is NOT a costume accessory/base)