Downspout Rainwater Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Downspout Rainwater Filter for 100m
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 80
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A highly efficient rainwater collector featuring a practical, side-removable strainer. I designed this model because other available variants didn't suit my needs and diverted too little water into the barrel.
How it works: Install this downspout collector at the exact height where you want the maximum water level in your rain barrel. Once the barrel is full, the overflow hole is automatically blocked by the water level, and the excess rainwater simply continues down the original downspout.
Key Features:
Side-Removable Strainer: Extremely easy to pull out, clean, and push back in without disassembling the downspout.
Dimensions: The top opening is 103 mm, perfectly suited for standard 100 mm downspouts.
Output Connection: Designed to connect directly to a 50 mm HT Pipe Connector / hose.
Print Settings (Crucial for waterproofing):
Recommended Material: PETG or ASA
Layer Height: 0.16 mm (High Quality)
Wall Generator: Arachne
Wall Lines / Perimeters: 5 (Highly recommended to make the part waterproof)
Upper and Lower Shells: 6
Infill: 15% Gyroid
Supports: Yes, support is needed for this model.