Hollow-Face Vase Brooch — the vase is a hole, and it follows you
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The vase is a cavity, and it reads as bulging out — and it turns to follow you as you walk past. Magnetic back, no pin.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
The vase on this brooch is not raised. It is the exact mould of a vase, sunk 5.2 mm into the plaque — a hole shaped like a vase. Look at it and you will see a vase bulging out at you; walk past it and the vase appears to turn and keep facing you.
Nothing on the brooch moves. You do.
Plaque 47 × 55 × 8 mm · backer 32 × 18 × 4.3 mm · ≈24 g of PLA for the pair.

Why it works
Your visual system holds a hard prior that familiar objects are convex, and it will override the shading rather than give that prior up. Once the surface is read as convex, its apparent surface normals run backwards from the real ones — so when you move, the illusory bulge appears to rotate towards you.
It is the same mechanism as a hollow-face mask. Unlike an anamorphic trick it does not need one correct vantage point, which is exactly why it survives being worn across a room.
Slot 1 is the whole illusion
The cavity stays one colour on purpose. A colour boundary inside it hands the eye a truthful cue about which way the surface faces, and the effect dies.
For the same reason, use a light, matte filament for the body. Gloss, silk and metallic all throw specular highlights that tell the truth about the surface, and the vase goes flat. Matte PLA is ideal.
0.2 mm layers work. 0.12 mm is better if you have the time: the cavity is a smooth curved surface, finer layers give a cleaner shading gradient, and the gradient is the illusion.
Two printed pieces, seven named solids

Import hollow_face_vase_brooch_mc.stl → right-click → Split to Parts → assign a filament per part. Nine parts appear, because plugs and backer_seals are two pieces each.

solid | filament | role |
| 1 — light, matte | body + the concave vase. The only colour inside the illusion |
| 1 | fill the bore over the plaque's magnets, up to the ink band |
| 2 | the shelf the vase stands on |
| 3 | the niche behind it — and the lid over the plaque's magnets |
| 4 | a real bouquet over an unreal vase |
| 1 | the plate that goes behind the fabric |
| 1 | the backer's two magnet lids |
Coordinates are preserved exactly, which is the point — a 0.6 mm flush inlay cannot be re-registered by hand. The per-part STLs ship alongside if you would rather place them yourself.
All four colours live in one 0.6 mm band at the top of the part: three bi-colour layers, ≈3 g of purge. Ink volume is free; ink height is the whole bill.
Printing
| value |
Orientation | as exported — the cavity is a bowl, nothing overhangs |
Layer height | 0.2 mm (0.12 mm is visibly better here) |
Supports | none |
Walls | 3 |
Plate | plaque + backer together |
Turn ironing OFF — all four colours meet on the top face, and ironing drags one across another.
⏸ The magnet pause — Z = 3.70 mm, after LAYER 19, at 0.2 mm layers
Right-click the layer slider at that height → Add Pause. One pause serves the whole plate: the plaque and the backer bury their magnets at the same height on purpose. Four wells open — two in the brooch, two in the backer. One Ø5 × 3 mm neodymium disc per well, then resume.
The magnets end up completely enclosed — no part of one is visible in any finished face, and there is nothing to glue.
The pause is early, 19 layers of about 40, and that is the whole design. Each magnet has to finish 0.6 mm from the back face — the face that pulls against its partner — so only 1.4 mm of plastic sits between the two magnets. The pull between two discs falls off as roughly the fourth power of that gap, so it is the only number that matters. Everything above each magnet is closed by the plugs and backer_seals solids, printed in place.

Polarity — the step that actually goes wrong
Four discs, exactly one arrangement works:
all four the same way round → the two pieces repel;
one of a pair flipped → one station attracts, the other repels, so the brooch sticks, pivots on the good magnet and hangs crooked. This is the sneaky one — it feels fine when you test it with a fingertip.
While the printer is paused: let all four magnets stack into one column (they are now alternating N-S-N-S), split it into two pairs, pull each pair apart and mark the two faces that were touching. Those two must end up facing each other across the fabric. Both plaque magnets go in marks up; both backer magnets marks up as well.
Wearing it
Plaque in front of the fabric, backer behind, slide the pair where you want it. No pin, so nothing pierces the cloth — safe on knitwear, silk, a lapel, a canvas bag, a hat. The two stations are 22 mm apart so the brooch cannot rotate on a single pivot.
Two magnets across a fold of fabric is a firm grip, not a permanent one. On something thick — a heavy wool coat, a padded jacket — the extra gap costs a lot of force. Test it before wearing it out.
Look into the cavity under directional light: a window, a desk lamp off to one side. Flat overhead light is the one condition that weakens it. If the vase still reads as a hole, close one eye and move your head — the moment it flips, it stays flipped.
⚠ Keep the magnets away from pacemakers, and away from phones, cards and watches. Four small neodymium discs are not toys.
The .scad is included. The vase is a plain table of [height, radius] pairs, so you can draw a different vessel by editing numbers.
