1 / 3
Pickguard for the Harley Benton Bass Guitar Kit J-Style — image 1
1 / 3

Pickguard for the Harley Benton Bass Guitar Kit J-Style

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A custom fit pickguard for the DIY J-Style e-bass kit from Harley Benton - Fits more accurately and looks much better.

Rating
0 / 5
Likes
4
Downloads
2
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution — Share Alike

Forword

I bought the Harley-Benton J-Style DIY e-bass kit from Thomann.de and got some nice, affordable gear. However, some parts are on the cheap side of "affordable". The most prominent part is the original white pickguard.

Not only does the white color look cheap af, but it also doesn't fit nicely. A too-tight fit is okay, as you can always file it down and open it up. But the pickguard was too small in areas, leaving ugly gaps - adding material is not an option.

So I redrew the pickguard and made it available here. I printed it on my Prusa XL on a special textured print sheet. The result is stunning and looks beautiful when light hits the surface.

Print Settings

  • PETG black

  • 3 perimeters

  • Single first perimeter

  • Only one perimeter on all top surfaces

  • 100% rectilinear infill

Note: There is a version without holes for the screws. Since I am not sure how identical the position of the factory-drilled pilot holes are from kit to kit, you can drill them yourself. With 100% infill and a slow-rotating drill bit, it should be no deal.

Additional Support Information

Please consider following me if you like my work:

And if you feel like buying me a coffee to stay productive and creative, you can do so by sending me a tip via Printables or PayPal:

PayPal.Me

Or feel free to use one of the following affiliate links below - without additional or hidden costs for you, of course!

Generic Affiliate Links

Thank you very much, and happy printing,
Martin

Tags