duna shoes

website: https://www.riverfamily.art/

Use flexible filament (TPU)

use the gcodes for an optimized print path

how to print the gcodes:

- use a printer with 0.4 nozzle and at least 250x250 build volume
- extract the SD card or USB drive from the printer
- insert the SD card or USB drive in a computer
- copy the gcodes on the SD card or USB drive
- insert the SD card or the USB drive back in the printer
- send the gcodes from the printer interface

--

Bambu Studio / Orca Slicer settings:

global:

- layer height: 0.24mm
- line width sparse infill: 0.6mm
- line width walls: 0.6mm
- wall generator: Arachne
- order of walls: outer/inner
- walls: 2
- top shell layers: 0
- bottom shell layers: 0
- infill density: 0%
- infill direction 45
- speed: 18 mm/s
- enable support: no

duna-1:

- object flow ratio: 1.2

duna-2:

- line width sparse infill: 0.4mm
- walls: 0
- infill density: 33%
- infill pattern: grid

duna-3:

- object flow ratio: 1.1
- walls: 0
- infill density: 100%
- infill pattern: rectilinear

duna-4:

- walls: 0
- infill density: 50%
- infill pattern: grid

duna-5:

- line width sparse infill: 0.4mm
- walls: 0
- infill density: 33%
- infill pattern: rectilinear
- infill direction: 0

duna-6:

- object flow ratio: 1.2
- walls: 10

filament:

- Retraction: 1.8mm
- Wipe: no
- Z hop: 1.2mm, Normal type
- Max volumetric speed: 2.5 mm^3/s 
- Temperature: 220°C - 230°C
- Fan: off