Brush Maker
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.62 – €1.98 net (excluding VAT)
For file: brushmakerv8_PETG_MINIIS_1h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.80 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 1.76 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple mold to make a silicone brush with its matching stand.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
How to use
Print all the parts (mold halves, bristle plate, stand)
Assemble the two mold halves and hold them together (clamps, rubber bands, or screws, depending on how you fastened yours)
Prepare the two-part silicone
Slowly inject the silicone through the injection hole with a syringe, until it comes out of the vent hole
Let it cure (curing time depends on the silicone you use)
Open the mold and remove the brush
Place the finished brush on its stand
Tip: if you use a high-temperature two-component silicone, the brush also comes in handy for cleaning 3D printer nozzles.
Enjoy! – tmjoke