Adventure Force Axis Switch Pro NStrike Buffer Tube Stock Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A NStrike stock buffer tube adapter with a form factor for the Adventure Force Axis Switch Pro, though it will work on m
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 2
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
A NStrike stock buffer tube adapter with a form factor for the Adventure Force Axis Switch Pro, though it will work on most NStrike blasters.
Buffer Tube Adjustable Stock
https://makerworld.com/en/models/3256390-buffer-tube-adjustable-stock
https://www.printables.com/model/1831762-buffer-tube-adjustable-stock
Materials:
4x M3x 6mm Machine Screws
2x 0.16x0.2x0.59 - (0.4*5*15mm) 10 lap springs, but pen springs should also work. Shorter would likely be better.
Printing Instructions:
You will need supports. I recommend PETG with 6-8 walls and 20-30% gyroid infill, but PLA should be fine. You will be fine with 4 walls, 20% infill - but the weight will not be as satisfying.
Installation Instructions:
1) Insert the catch into the adapter with the angled catch point facing the blaster.
2) Add 2 springs into the divots in the catch and place the cover with the retention pins in place on the springs.
3) Secure the catch to the blaster with 4 M3x6mm screws.
4) Use it like pretty much any standard NStrike stock and the buffer tube like any other buffer tube.