Skeleton on a Trike — 60 mm Halloween Figure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A skeleton pedalling a child's trike, printed as one solid piece.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
A skeleton pedalling a child's trike, printed as one solid piece.
No assembly, no glue, no separate wheels — skull, ribcage, trike and all three wheels come off the
plate as one part. At 60 % scale it is 31.4 × 37.1 × 60 mm and about 6 g of PLA. That is a
Halloween decoration you can print six of in an evening off one plate.
The photos are a real print of this file at 60 % scale, orange PLA, unpainted, straight off the
plate.
What is measured, not guessed
- Real anatomy, cut into the geometry — individual ribs with gaps you can see through, a spine, a
pelvis, separated arm and leg bones. 199 994 triangles, and 33 through-holes in the mesh: that is
the ribcage and the frame counted by the geometry, not by eye.
- One connected solid, zero open edges. There are 13 non-manifold edges where thin bones meet —
Bambu Studio's own mesh check reported nothing to repair (0 edges fixed, 0 degenerate facets) and
sliced it as-is. Every common slicer handles these silently.
- 13.4 % of the surface is past 45°, 9.3 % past 60°. Largest near-horizontal ceiling: 1.56 cm² over
a 19.6 mm span at file scale, which is 0.56 cm² and a 12 mm span at 60 % — the underside of the
seat and handlebar.
- It needs supports. Tree (auto), build-plate only. The outstretched arms, the seat and the wheel
axles all need them; the ribcage itself mostly bridges.
- Plate contact 197 mm² in the file, 71 mm² at 60 % — three small wheel contacts holding up a 60 mm
tall part. The brim is not optional here.
