Extruder Visualizer Mercedes Star
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.15 net (excluding VAT)
For file: MercedesStern2_proj_0.1mm_PETG_MK3S_11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
"Ein guter Stern auf allen Druckern"
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 114
- Makes
- 2
- Views
- 641
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
What better way to visualize your extruder movements than with a mercedes benz star?
Print it in 0.1 mm layer height to ensure all the details of the model. It got quite filigrane to be as accurate as possible. Depending on you printer settings make sure to have a very good and dense first layer. Maybe slow down the movement a little while printing or increase the extrusion rate. Otherway around for the tip, make sure to have either good cooling of speed a little to not melt the tip during the last couple layers.
Afterwards, just glue two 8 mm magnets on the back and let it spin!