PocketOBI — Makita 18V LXT battery diagnostic tool (case + PCB)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standalone diagnostic tool for Makita 18V LXT battery packs
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 474
- Makes
- 3
- Views
- 1,457
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
PocketOBI is a handheld diagnostic tool for Makita 18V LXT battery packs. Plug a pack in and it reads the pack voltage, individual cell voltages and their spread, both temperature probes, the charge count, the serial number and production dates, and the over-discharge and overload counters the BMS has been keeping since the pack left the factory.
It gives a health verdict, classifies the fault when there is one, and guides you through the faults that can actually be cleared. It runs on an ESP32-C3 with a 2.4 inch colour screen and a rotary encoder, so no computer is needed. A USB bridge mode is included if you'd rather work from the desktop app.
Firmware, PCB and desktop app
https://github.com/TheRepairforge/PocketOBI
What you need besides the printed parts
ESP32-C3 SuperMini with header pins — https://s.click.aliexpress.com/e/_c39VtIA1
2.4 inch TFT display with rotary encoder and header pins — https://fr.aliexpress.com/item/1005008679609252.html
Makita battery connector — https://s.click.aliexpress.com/e/_c3kjHXSd
2 x 470 ohm resistors - resistor kit — https://s.click.aliexpress.com/e/_c3J3db6b
JST PH2 connector, 6 pin — https://s.click.aliexpress.com/e/_c3kkkGFF
Male connector you can choose 6.3 or 7.8. Choose the right support depending on it :
-if you have :https://s.click.aliexpress.com/e/_c4aShGcH
choose : Battery_connector-final-6.3-connector-v2
-if you have : https://s.click.aliexpress.com/e/_c3p1OCxj
choose : Battery_connector-final-7.8-connector-v28 x M3 screws (6 x 16mm, 2 x 10mm) — https://s.click.aliexpress.com/e/_c3kkkGFF
8 x brass threaded inserts — [link]
Soldering wire : https://s.click.aliexpress.com/e/_c4BJj91Z
Multimeter - https://s.click.aliexpress.com/e/_c3dXrpSX
USB-C power supply or power bank
Build video
Full walk through, from parts to first power up:
Credits
This is a remix of "Makita battery adaptor + XT60 + OBI" by Yanev, whose adaptor is what makes the connection to the pack possible.
https://www.printables.com/model/247856-makita-battery-adaptor-xt60-obi
The Makita LXT protocol itself was reverse engineered and released by Martin Jansson in the Open Battery Information project. None of this exists without his work.
https://github.com/mnh-jansson/open-battery-information
Licensing
The printed parts in this model are a remix of Yanev's work and are released under CC BY-SA 4.0, same as the original.
The PocketOBI firmware, PCB files and desktop application are separate works and are distributed free and source available for non-commercial use, from the GitHub link above.
Built by The Repair Forge.