Creality Enclosure Heater mount for Ender-5 Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner mount, that places the heater at 45 deg
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Open Community License v1.1
Corner mount, that places the heater at 45 deg.
The top and bottom clips into the frame. There is a tab at the top to secure it to the frame by means of one of the spare enclosure "3030 T-slot nuts" and bolt.
Remove the back and side arcylic panels
Put the bottom m3 bolt into the heater (leave the top 2 out)
Clip the freshly printed bracket into the frame
Slide the bracket and heater up about an inch
Rotate the heater on the m3 bolt
Put in the additional 3030 T-slot nut into the frame
Screw the bolt into the 3030 T-slot nut (securing the bracket to the frame)
Rotate the heater back upright
Put in the other 2x m3 bolts